Drehkreuz-Tor: Planung eines breiten Zugangs ohne Kontrollverlust

Planning wide access without a loss of control, with a swing turnstile gate.

Considering the additional space requirements, a swing turnstile gate may be selected for a gate opening requiring increased space as compared to the space required for either a tripod or a narrow flap barrier. It allows a safe path for visitors, Mitarbeiter, mobility devices, service carts and luggage to flow safely across the lane without compromising access control.

It is great that it is flexible, but it also allows for it to be as easy as making it seem. An elegant and large door, glass and card reader are not a reliable doorway. This work must be a cooperative effort between the passage width, Sensoren, Barrierenbewegung, software signals, floor layouts and the response in the event of an emergency.

This guide is designed for the Office, Krankenhaus, School, Fabrik, Residential Community, Public Building, the System Integrator and Procurement Teams involved in the planning process for a swing-gate entrance.

Build from the ground up using the residents of the area using the Lane

Similarly to the previous question, the first question should NOT be “Which cabinet design looks best?” It should read, 'Who shall enter through this door?

A corporate entrance or area is responsible for employees, Besucher, delivery persons and wheelchair users. Medical carts and slower moving patients will likely also be required in a hospital setting. Tools or bulky protective clothing may be carried by workers coming in or out of the factory.

Identify the actual user groups and then define:

• A minimum of 210mm (8in) will be provided for required clear passage width.
• Peak arrival periods
• Typical credential
• You can trade on both sides market movements, both up and down.
• Luggage/carts for using
• Visitor assistance
• Security supervision
• Notfallbewegung

Ironman describes its Schwenkbarrierentor as a “silent” motorised barrier which is suitable for greater wheelchair, luggage and pedestrian clearances, and is suitable for RFID, biometric and QR card access. The latter features are beneficial but not sufficient to match end-to-end to the site and customer.

Recognize the strengths and limitations of the swing gate.Know how the swing gate works and what it can and cannot do.

Instead of the rigid ambience of a full turnstile, the swing gate affords the user a sense of passing through while allowing for additional security at the same time. That's an ideal material for a building's entrance where security is an issue, but the owner wishes to project an open and welcoming image.

It has the following key advantages:

• Flexible passage width
• Quiet automatic movement
• Works with various types of readers
• A change in color or marked contrast when range open and closed
• Ability to incorporate all necessary aspects compared to a manned commercial or public entrance.

The alternative is that a swing barrier is not a fence per se. If you have a low panel, that might be easier to climb than a high panel, but if the lane runs so wide that it is very difficult to cover with sensors and control with barriers, then, of course, you can't climb it, entweder.

It is important that the supplier advises the user of the location of the product between a standard door, a compact turnstile, an anti-climb swing door and a full height security barrier.

Be careful about the choice of the passage width.

Bigger lanes aren't necessarily good lanes.

Commonly, the larger the opening, the longer the motor has to travel, the longer the length of the opening time, and the longer the closing time. A wider opening may necessitate extra covering for the sensors or also a various placement of the cabinets.

Ensure there is adequate clearance after Caboose Gates, Cabinets, Handles and surrounding objects are fitted. Avoid using only the name of the product dimension.

Planning Area	Main Question	Evidence Needed
Durchgangsbreite	Who needs the lane?	User review
Peak flow	How many arrive together?	Traffic estimate
Reader speed	How long does validation take?	Live test
Sensor coverage	Is the full lane monitored?	Sensoranordnung
Building space	Can panels and doors open safely?	Approved drawing
Wartung	Can technicians reach components?	Service-space review

This should also include the approach area on the layout. There must be sufficient room left between the queue barriers and furniture and between the users and other lane for a user to present a credential and await the opening of the panel and to pass without coming into contact with the queue barriers or furniture.

Die USA. Access Board designates turnstiles as not being part of an accessible route for projects subject to standards in the U.S. Accessible gate or door which is adjacent to the first one may be necessary and should follow a similar use pattern.

Connect the Reader, Controller and Gate Logic

Access-control system determines if the credential is valid. The physical passage that follows controlled by the turnstile.

The use of an RFID card, Mobiler Ausweis, QR-Code, Fingerabdruck, Gesichtserkennung, visitor pass, or remote opening from a security desk are ways to identify a project.Identification of a project may include RFID cards, Mobilfunkzugangsdaten, QR, Fingerabdruck, Gesichtserkennung, visitor pass, or remote opening from a security desk. Vor der Produktion, Definieren Sie:

• A model of a reader with its dimensions.A reader model and its dimension.
• Angle and level from which an item is mounted
• Eröffnungssignal
• Kommunikationsschnittstelle
• Access and exit rights.Entry/exit access rights.
• Offline behaviour
• Alarm outputs
• Veranstaltungsrekorde
• Manuelle Freigabe
• The software integration team is responsible for configuring it.It is integrated via the software integration team.

Ironman's access control equipment and access control turnstile gate solutions demonstrate a variety of authentication methods, but it is important to verify compatibility with the approved reader, Controller, software version and gate configuration.

An order must have more than just “Supports access control”. The signal to start the gate, and how to proceed when a signal is not received, should be known by the project team.

Respond to sentences that have been edited.Give edited sentences a “1” approval.

You should in general, get one controlled passage from a valid credential.

The sensor system might be required to sense:

• Eintrag vor der Genehmigung
• Zu dichtes Auffahren
• Need more than a single pair to enter together.At least two persons should enter together.
• Falsche Richtungsbewegung
• A Self Interrupted Rhubarb (SIR)
• An object is close to the panel.There is an object close to the panel.
• Passage-Timeout
• Someone who returns an instrument that has been authorised for loan.Authorised user returned.

Request the construction and sequence of the sensors. Alarms and what causes the lane to close should be explained by the supplier, as should be the timing of the opening of the panel and how long the lane is available.

These should be the same as those of the real users. There may be a different time regime required for a fast corporate entrance, as opposed to a hospital, school or residential building.

The Independent Coordinator should work with the building map to fine-tune the Gate.

Oftentimes, turnstiles are chosen before the last few details of a floor plan are determined. This can cause unnecessary issues in the future.

Make sure the gate is pushed against:

• Sightlines are able to be viewed from the reception and security-desk area.
• The locations of elevators and doors↓
• Floor conduits
• Anchor positions
• Queue barriers
• Visitor assistance space
• Maintenance-panel clearance
• Kameraabdeckung
• Emergency routes
• Nearby furniture

All cabinets are directed to be placed using Ironman's installation guide and not before marking and/or drilling anchor holes. This allows spacing and alignment issues to be identified prior to making any permanent changes to the floor.

Approved final lane drawing prior to production, particularly if working with a custom cabinet length, reader brackets, glass panels or finishes.

Review and reinforce safety and emergency behaviours.Review and reinforce: safety and emergency behaviours.

This swing panel objects are in the pedestrian space, so be careful with the safety logic.

The system should sound the right signals through if a child, bag or wheelchair is in the way or an obstacle is left in the lane. The supplier should describe the range, Schlussgeschwindigkeit, anti-pinch response, response to repeated obstructions etc. of the sensor.

The project team has to determine what will occur at each of the following:

• Stromausfall
• Netzwerkunterbrechung
• Controller fault
• Brandmeldereingabe
• Notfallknopf-Aktivierung
• Manuelle Sicherheitsfreigabe
• The machine fails due to motor or sensor problems.Failure of motor/sensor.

Not one solution fits all the problems at all the sites. The manufacturer should provide which the gate is capable of doing and leave space for mention of the final approval from the architect, Feuerberater, Integrator, operator and local authority to approve the final strategy.

Check Outdoor Claims by Component

The basic term Swing turnstiles refers to outdoor but also for buildings are installed where there is a need for turnstiles. “Outdoor model” is too generic to be of assistance.

Review of protection of cabinet/reader, Steuerungsfach, Kabeldrüsen, Motorbereich, fasteners, drainage system, anchorages and emergency controls.

The IEC defines the IP rating as a measure of enclosure's resistance to dust and liquids. If they added readers, Zeigt, holes or cable entries, does this change the tested configuration?

Direct sunlight, condensation, Salzluft, cleaning water, temperature range for operations and wind force on large glass panels are all additional factors that need to be taken into account when used in outdoor applications.

Ensure that the Final configuration is tested prior to shipment.

Any approved reader, Controller, panel size, Fahrbahnbreite, sensor setting and/or software signal should be used during factory acceptance testing if possible.

Empfohlene Tests umfassen:

• Gültige und ungültige Qualifikationen
• One-person passage
• Zu dichtes Auffahren
• Falsche Richtungsbewegung
• Hinderniserkennung
• Passage-Timeout
• Netzwerkunterbrechung
• Stromgewinnung
• Manuelle Freigabe
• Notfallöffnung
• Alarmausgang
• Ereignisaufzeichnung

Ask to see test videos, Inspektionsunterlagen, Schaltbilder, software versions and serial numbers and packaging photographs.

Testgegenstand	Erwartetes Ergebnis
Gültige Qualifikation	Das Tor öffnet sich einmal
Ungültige Qualifikation	Der Zugang bleibt verweigert
Wide-lane passage	User clears safely
Versuch von Tailgating	Alarm ist ausgelöst
Hinderniserkennung	Panel stoppt sicher
Netzwerkausfall	Genehmigter Rückfall beginnt
Notfalleingang	Gate folgt genehmigter Logik
Ereignisaufzeichnung	Korrekte Daten werden gespeichert

Demonstrating one type of showroom unit is in no way indicative of how a customised system (using a different panel, controller or reader) might operate.

After all you need to plan your plan, without taking it for granted.

Very difficult serviceable gates will cost more to own over time.

Ensure that the no-destruction of items (nearby furniture and reception structures) is possible for the technicians when they are accessing the motor and controller, removing anchors, and carrying out inspections.

Discuss the following spares, any back ups of settings, remote diagnosis and length of between-motor and controlboard availability.

Clear wiring, parameter, troubleshooting and maintenance documents should be provided to the local installer prior to commissioning.

Outline a useful RFQ.Create an effective RFQ.

Before preparing a practical RFQ a practical project should have the following mentioned: Project application, Land, Entrance Drawing, Lane quantity, User groups, Peak flow, Need of passage width, Art der Qualifikation, Lesemodell, Zugangskontrollplattform, Indoors or outskirts, Remedy material, Beenden, Notfalllogik, Testing scope, Installation responsibility, Spare parts, and shipment date.

Submit the project package into the Ironman-Kontaktseite as opposed to just asking questions about the standard swing-gate fee.

Better project data enables the supplier to anticipate issues in lane, Integration, safety and maintenance issues that occur prior to production.

Schlussfolgerung

A swing turnstile gate can be used in an entry, if an entrance requires wider and a more comfortable passage combined with electronically operated access control.

It's more than meets the eyes – it's more than meets the panel and motor. The user group is important, as well as the width of passage, the integration with the reader, the sensor logic, emergency actions, environment protection, testing and maintenance plan.

The whole entrance and final configuration will be reviewed by a trusted supplier prior to delivery.

FAQs

Swing turnstile gates are typically installed in a public building.Typically, swing turnstile gates are used in a public building.

This is a very common type in offices, Krankenhäuser, schools and campuses, as well as residential buildings and public facilities. They are particularly beneficial when there is a wider embracing space required.

To use a Swing Gate you can implement two different techniques: RFID or QR codes, oder Biometrie.

Ja, when reader and controller as well as Software and opening signal are compatible. Oder, test approved devices in combination prior to shipment.

Is it possible to provide wheelchair access on a swing turnstile?

It could allow a wider way through, but will be dependent on the route and local access. There may still be a separate, adjacent accessible gate or door which needs to be provided.

How a Swing Gate Works to Stop Tailgating.

Abnormal movement following 1st authorisation is detected using the infrastructure or by passage logic. The barrier panel isn't designed to fend off all tailgating.

What information do they need to get a quotation?

Specify the plan, Fahrbahnbreite, flow of users, credential that will be used, user interface software, Umwelt, emergency needs, testing range and time.